View MSK4890H_1284424.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ISO-9001 CERTIFIED BY DSCC
M.S.KENNEDY CORP.
4707 Dey Road Liverpool, N.Y. 13088
600V/300A SCR/REGEN PEM
4890
(315) 701-6751
FEATURES:
SCR/REGEN Topology 600V Rated Voltage 300A Continuous IGBT Current Internal Zener Clamps on Gate Proprietary Encapsulation Provides Near Hermetic Performance MIL-PRF-38534 Screening Available (Modified) Light Weight Domed ALSIC Baseplate Robust Mechanical Design for Hi-Rel Applications Ultra-Low Inductance Internal Layout Withstands 96 Hours HAST and Thermal Cycling (-55C to +125C)
MIL-PRF-38534 CERTIFIED
DESCRIPTION:
The MSK 4890 is one of a family of plastic encapsulated modules (PEM) developed specifically for use in military, aerospace and other severe environment applications. The SCR/REGEN configuration and 600 volt/300 amp rating make it ideal for use in high current motor drive and inverter brake applications. The Aluminum Silicon Carbide (AlSiC) baseplate offers superior flatness and light weight; far better than the copper or copper alloys found in most high power plastic modules. The high thermal conductivity materials used to construct the MSK 4890 allow high power outputs at elevated baseplate temperatures. Our proprietary coating, SEESTM - Severe Environment Encapsulation System - protects the internal circuitry of MSK PEM's from moisture and contamination, allowing them to pass the rugged environmental screening requirements of military and aerospace applications. MSK PEM's are also available with industry standard silicone gel coatings for a lower cost option.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
Motor Drives Inverters
1 Rev. B 8/05
ABSOLUTE MAXIMUM RATING

7
ELECTRICAL SPECIFICATIONS
NOTES:
Guaranteed by design but not tested. Typical parameters are representative of actual device performance but are for reference only. Industrial grade and "E" suffix devices shall be tested to subgroup 1 unless otherwise specified. Military grade devices ("H" suffix) shall be 100% tested to subgroups 1, 2 and sample tested to subgroup 3. Subgroups 4, 5 and 6 testing available upon request. Subgroup 1, 4 TA = +25C 2, 5 TA = +125C 3, 6 TA = -55C 6 VGE=15V unless otherwise specified. 7 Continuous operation at or above absolute maximum ratings may adversly effect the device performance and/or life cycle. 1 2 3 4 5
2
Rev. B 8/05

VCE VGE ICC ICC IT ITSM IF IFP VCASE
Collector to Emitter Voltage 600V Gate to Emitter Voltage 20V Collector Current (Continuous) 300A Collector Current Pulsed (1mS) 600A SCR Forward Current (Continuous) 220A SCR Peak Surge Current (1/2 Cycle 60Hz) 1100A REGEN Diode Current (Continuous) 50A REGEN Diode Current Pulsed (1mS) 100A Case Isolation Voltage 2500V
TST TJ TC
-55C to +125C Storage Temperature Range 150C Junction Temperature Case Operating Temperature Range -55C to +125C MSK 4890H/E -40C to +85C MSK 4890
TYPICAL PERFORMANCE CURVES
3
Rev. B
8/05
SCREENING CHART
4
Rev. B
8/05
MECHANICAL SPECIFICATIONS
WEIGHT = 200 GRAMS MAX.
ORDERING INFORMATION
MSK4890 H
SCREENING BLANK=INDUSTRIAL; E=EXTENDED RELIABILITY; H=MIL-PRF-38534 CLASS H (MODIFIED) GENERAL PART NUMBER
THE ABOVE EXAMPLE IS A MILITARY SCREENED MODULE.
M.S. Kennedy Corp.
4707 Dey Road Liverpool, New York 13088 Phone (315) 701-6751 FAX (315) 701-6752 www.mskennedy.com
The information contained herein is believed to be accurate at the time of printing. MSK reserves the right to make changes to its products or specifications without notice, however, and assumes no liability for the use of its products. Please visit our website for the most recent revision of this datasheet.
5
Rev. B
8/05

▲Up To Search▲

Price & Availability of MSK4890H

	To Download MSK4890H Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .